Search results for: Haliade-X

377 results

A list of search results

  • 18 December 2020
    Contracts & Tenders, Wind Farm Update

    GE Renewable Energy has secured a preferred turbine supplier contract to provide its 14 MW Haliade-X turbine for the third phase of the Dogger Bank offshore wind project. The 14 MW Haliade-X is an upscaled version of the 13 MW unit which will be installed at Dogger Bank A & B, and Dogger Bank C […]

  • 13 April 2021
    Contracts & Tenders, Technology

    Bakker Magnetics is about to start the production of magnetic assemblies for the GE Haliade-X turbines that will be installed at the 3.6 GW Dogger Bank offshore wind project in the UK. Bakker Magnetics will fabricate and assemble magnetic assemblies for the turbines across all three phases of what is the world’s largest offshore wind […]

  • 11 June 2019
    Ports & Logistics, Technology

    Spanish turbine tower manufacturer GRI has shipped out the four tower sections that will be part of GE’s Haliade-X 12 MW prototype to be installed later this summer in Maasvlakte-Rotterdam. The four segments at GRI’s site in Seville will be arriving in the Netherlands before the end of the month, GE Renewable Energy said. Upon arrival […]

  • 20 June 2019
    Ports & Logistics, R&D, Technology

    The four tower sections that will be part of GE’s Haliade-X 12 MW wind turbine prototype have arrived in Rotterdam. The four segments left GRI’s site in Seville, Spain, earlier this month. After unloading the tower segments, a series of pre-assembly works will take place, including the installation of some tower segments, GE Renewable Energy said. The […]

  • 15 January 2019
    R&D, Technology

    GRI Renewable Industries has started manufacturing a tower for GE’s Haliade-X 12 MW offshore wind turbine prototype in Sevilla, Spain. The work on the tower for the prototype started at the end of December, the company said. GE announced in March 2018 its plans to invest over USD 400 million over the next three to five […]

  • 10 May 2018
    Technology

    GE Renewable Energy has revealed additional details on the size and power of the Haliade-X 12 MW offshore wind turbine.

  • 18 April 2019
    R&D

    LM Wind Power has produced the first blade for GE’s Haliade-X 12MW offshore wind turbine at its factory in Cherbourg, France. According to LM Wind Power, the 107m long blade, the world’s largest, has completed the molding process. The LM 107.0 P will now proceed with post-molding finishing touches, before undergoing testing and validation to demonstrate its ability […]

  • 12 April 2019
    Ports & Logistics

    GE Renewable Energy is currently preparing the site in Maasvlakte, the Netherlands, for installation of its Haliade-X 12MW wind turbine prototype. Preparations of the site which will host the world’s most powerful offshore wind turbine are being carried out in partnership with Future Wind. The two companies signed an agreement at the beginning of the year […]

  • 11 October 2021
    Contracts & Tenders, Wind Farm Update

    GE Renewable Energy has received a firm order from Vineyard Wind to supply Haliade-X wind turbines for Vineyard Wind 1, the first utility-scale offshore wind installation in the US. GE was announced as the preferred turbine supplier for the project in December of 2020. Vineyard Wind 1 recently became the first offshore wind farm in […]

  • 3 October 2019

    The Offshore WIND team brings you the top ten most read news in the month of September 2019. Siemens Gamesa Wants a Piece of Senvion German wind turbine manufacturer Senvion has entered into an exclusivity agreement with Siemens Gamesa to pursue negotiations for the sale of selected Services and Onshore assets in Europe. UK Offshore […]

  • 17 November 2021
    Operations & Maintenance, Technology

    GE Renewable Energy has selected Cotes to provide dehumidifiers for the GE Haliade-X offshore wind turbines. The dry-air solution that Cotes provides to GE Renewable Energy, a combined desalter and dehumidifier, is now approved for global Haliade-X wind farm projects starting with the Dogger Bank wind farm in the North Sea, Cotes said. ”It is […]

  • 10 November 2020
    R&D, Technology

    LM Wind Power’s 107-metre blade for the GE Renewable Energy’s Haliade-X wind turbine has received its Component Certificate from TÜV Nord. The component certification hinged on the testing of two blades produced at LM Wind Power’s factory in Cherbourg, France, the company said. One blade completed its testing at the WTTC test facility in Boston, […]

  • 3 April 2023
    Business & Finance, Business development, Equipment, Industry, Infrastructure, Technology

    GE and Siemens Gamesa have resolved their wind turbine technology patent disputes ”in their entirety”, GE said in a statement. ”GE and SGRE have reached an amicable settlement of all their wind turbine technology patent disputes in the United States and Europe on confidential terms and have granted each other and their respective subsidiaries worldwide […]

  • 6 November 2019
    R&D, Technology

    The blade for GE’s Haliade-X 12MW offshore wind turbine has arrived at MassCEC’s Wind Technology Testing Center (WTTC) in Boston, U.S. The 107m long blade will undergo a series of fatigue tests that include moving it millions of times during a few months to validate that it can withstand more than 25 years of operation […]

  • 3 July 2019
    Jobs & Recruitment

    GE Renewable Energy plans to recruit more than 200 employees at its LM Wind Power wind turbine blade manufacturing site in Cherbourg, France. 60 out of the additional employees were recently recruited and just began intensive training at the factory’s ‘Center of Excellence’. Opened in April 2018, the Cherbourg facility became the first wind turbine […]

  • 29 March 2023
    Vessels

    Jan De Nul’s new jack-up vessel, Voltaire, has left Ras Al Khaimah in the United Arab Emirates (UAE), where it underwent further commissioning and project-specific adjustments ahead of its first assignment, and is now on its way to Europe. The vessel’s first deployment will be on the 3.6 GW Dogger Bank Wind Farm project offshore the UK, the world’s […]

  • 21 February 2019
    R&D, Technology

    GE’s Haliade-X 12 MW offshore wind turbine is well suited and competitive for monopile solution over a wide range of site conditions, according to the specialist engineering firm Gavin and Doherty Geosolutions (GDG). GDG has been working with GE Renewable Energy to develop optimized XL Monopile soil-structure interaction models to support GE’s development of optimized foundation designs for […]

  • 21 June 2019
    Ports & Logistics

    LM Wind Power has rolled out the first blade for GE’s Haliade-X 12MW offshore wind turbine at its factory in Cherbourg, France. According to the company, the 107m long blade, the world’s largest, has made its first trip outside the factory. Final preparations for the shipment of the LM 107.0 P blade to Maasvlakte-Rotterdam in the Netherlands are now […]

  • 20 January 2021
    Technology

    GE Renewable Energy has officially received a type certificate from DNV GL for the Haliade-X offshore wind turbine with a 13 MW power output. The Haliade-X 12 MW prototype, installed in the Port of Rotterdam in 2019, obtained a full type certificate from DNV GL in November 2020. The prototype has then been optimized to […]

  • 22 October 2019
    Contracts & Tenders, Vessels, Wind Farm Update

    Jan De Nul’s new offshore jack-up installation vessel Voltaire will have its debut on the 3.6GW Dogger Bank offshore wind farm in the UK. With a lifting capacity of over 3,000 tonnes and standing taller than the Eiffel tower, Voltaire is the largest of its kind in the world, Jan De Nul said. The Voltaire […]

  • 10 October 2019
    R&D

    The first blade for the prototype GE Haliade-X 12 MW offshore wind turbine has arrived at Maasvlakte, according to the live webcam feed at the Port of Rotterdam. LM Wind Power is producing the 107m blades for the prototype turbine at its plant in Cherbourgh, France. According to ECN, part of TNO,  the measurement mast and the scanning LiDAR have been […]

  • 30 August 2019
    Ports & Logistics, Technology

    The nacelle of the prototype GE Haliade-X 12 MW offshore wind turbine has been installed on its tower at Maasvlakte in the Port of Rotterdam. As seen in this screenshot taken from a live webcam feed, the final tower section and the nacelle were installed by a heavy-lift crane tandem at Sif’s facility at Maasvlakte. […]

  • 21 September 2021
    R&D, Technology

    GE, Fraunhofer IGCV, and voxeljet AG have entered into a research partnership to develop the world’s largest 3D printer for offshore wind applications in order to streamline the production of key components of GE’s Haliade-X offshore wind turbine. The partners expect to launch the project during the third quarter of 2021 with initial printer trials […]

  • 26 March 2020
    Technology

    ABB has delivered its higher power medium voltage PCS6000 converters for GE’s Haliade-X 12 MW offshore wind turbine prototype installed in the Port of Rotterdam, the Netherlands. Officially inaugurated in mid-December 2019, the Haliade-X 12 MW turbine prototype reached its nominal output of 12 MW feeding into the public grid by the end of 2019 […]

  • 19 December 2019
    Business & Finance

    President and CEO of GE Renewable Energy’s Offshore Wind business John Lavelle has revealed details about the Haliade-X 12MW turbine to the Offshore WIND team during the inauguration ceremony held on 17 December in Rotterdam. The Haliade-X 12MW prototype set a new world record the past weekend by being the first wind turbine ever to generate 262MWh […]

  • 12 July 2021
    Contracts & Tenders, Vessels, Wind Farm Update

    After winning contracts to install GE Haliade-X 13 MW offshore wind turbines at Dogger Bank A & B last year, Jan De Nul has now signed an agreement with Dogger Bank Wind Farm for the transport and installation of 87 GE Haliade-X 14 MW units at the final phase of the project, Dogger Bank C. […]