Search results for: Formosa 1 Phase 2

30306 results

A list of search results

  • 12 November 2019
    Wind Farm Update

    Ørsted and project partners have held an inauguration ceremony for the Formosa 1 Phase 2 offshore wind project in Taiwan. Formosa 1 Phase 2 is an extension of the existing two-turbine Formosa 1 Phase 1 project, which was officially commissioned in April 2017. The 120MW project comprises 20 Siemens Gamesa 6MW turbines installed approximately 2 […]

  • 20 May 2019
    Wind Farm Update

    The Formosa 1 Phase 2 project has entered the construction phase following a groundbreaking ceremony held in Taiwan’s Miaoli County over the past weekend. Formosa 1 Phase 2 will comprise 20 Siemens Gamesa 6MW turbines installed on monopile foundations some 6km off the west coast of the Miaoli district in the Taiwan Strait. The project is owned by Formosa I Wind […]

  • 9 October 2019
    Wind Farm Update

    All 20 Siemens Gamesa 6MW turbines have been installed at the Formosa 1 Phase 2 offshore wind project in Taiwan. To remind, jack-up vessel Seajacks Zaratan installed the first turbine at the project site 6km off the west coast of the Miaoli district in the Taiwan Strait in July. Prior to commercial operation, each turbine goes through […]

  • 24 June 2019
    Wind Farm Update

    The installation of foundations has kicked off at the Formosa 1 Phase 2 offshore wind project in Taiwan. The installation began in early June, a spokesperson from COWI, who designed all the steelwork for the 20 monopiles and transition pieces, told Offshore WIND. Seaway Yudin is installing the foundations, which comprise monopiles produced by Germany’s EEW SPC and transition pieces manufactured by […]

  • 14 August 2019
    Grid Connection

    Tekmar Energy has secured a contract with JDR Cables to provide its cable protection system (CPS) for the Formosa 1 Phase 2 offshore wind farm in Taiwan. Tekmar will supply approximately 60 of its TekLink Mechanical Latch CPS for all of the project’s inter-array and export cables, as well as 60 hang off clamps which hold the […]

  • 22 March 2019
    Vessels, Wind Farm Update

    Seajacks’ self-propelled jack-up vessel Zaratan has departed for Taiwan ready to begin installation of the Formosa 1 Phase 2 offshore wind project. Zaratan will install all 20 Siemens Gamesa SWT-6.0-154 turbines on the 120MW wind farm in the Taiwan Strait in what is the first renewables contract for Seajacks outside Europe. The project is located around six kilometers off […]

  • 9 September 2019
    Wind Farm Update

    The Formosa 1 Phase 2 offshore wind project in Taiwan has generated its first power. According to Ørsted, 10 out of 20 Siemens Gamesa 6MW turbines have been installed at the project site, while six units began generating power. Prior to commercial operation, each turbine goes through a power generation test which takes 10 to 14 days […]

  • 25 July 2019
    Wind Farm Update

    Jack-up vessel Seajacks Zaratan has installed the first of the 20 Siemens Gamesa 6MW wind turbines on the 120MW Formosa 1 Phase 2 wind farm in Taiwan. The project is located around six kilometers off the west coast of the Miaoli district in the Taiwan Strait, with water depths ranging between 15 and 30m. Seajacks […]

  • 19 February 2019
    Operations & Maintenance, Wind Farm Update

    Siemens Gamesa has started producing the blades for the Formosa 1 Phase 2 offshore wind project in Taiwan. The company said the blades were cast at its Aalborg factory in Denmark using Swancor resin and hardener. Siemens Gamesa won the contract to supply 20 SWT-6.0-154 turbines, which will produce a capacity of 120MW, for the project in April last […]

  • 29 October 2019
    Wind Farm Update

    Jan De Nul has completed the EPCI scope for foundations, power cables, and scour protection on the Formosa 1 (Phase 2) offshore wind farm in Taiwan. Jan De Nul engineered, procured, and installed twenty offshore wind turbine foundations consisting of a monopile and transition piece with a grouted connection. Around the monopile foundations, 56,000 tonnes […]

  • 7 January 2020
    Wind Farm Update

    The Formosa 1 offshore wind project in Taiwan started commercial operation on 27 December, according to JERA. The 128MW wind farm consists of the 8MW Formosa 1 Phase 1, inaugurated in May 2017, and the 120MW Formosa 1 Phase 2 which was officially commissioned in November. Formosa 1 comprises two Siemens Gamesa 4MW turbines from the first phase […]

  • 15 April 2019
    Ports & Logistics, Wind Farm Update

    DHL Industrial Projects has delivered first wind turbine components for the Formosa 1 Phase 2 offshore wind farm to the Taichung Port in Taiwan. The first three vessels have been loaded in Aalborg, Denmark, Cuxhaven, Germany, and Phu My, Vietnam. The vessels are carrying 75-metre blades, 378-tonne nacelles, and tower sections up to 37 metres long. The two vessels carrying blades […]

  • 16 January 2019
    Business & Finance, Contracts & Tenders, Operations & Maintenance

    FairWind has signed a Letter of Intent with Siemens Gamesa to collaborate on turbine pre-assembly for the Formosa 1 Phase 2 offshore wind project in Taiwan. Under the agreement, FairWind will hire and train Taiwanese technicians to prepare them for the pre-assembly operations, which are scheduled to begin in the spring this year. The training […]

  • 26 June 2018
    Contracts & Tenders

    EEW SPC and Jan de Nul have signed a contract for the production of 20 monopile foundations for the Formosa 1 Phase 2 offshore wind farm in Taiwan. 

  • 28 August 2019
    Wind Farm Update

    UK-based Specialist Marine Consultants (SMC) has been awarded a contract to provide marine coordination services to Siemens Gamesa across the Formosa 1 Phase 2 offshore wind farm in Taiwan. The Formosa 1 Phase 2 project will comprise 20 6MW Siemens Gamesa wind turbines and is an extension to the already operating 8MW Formosa 1 Phase […]

  • 8 August 2019
    Grid Connection, Wind Farm Update

    Jan De Nul’s cable-laying vessel Willem de Vlamingh has completed the installation of the export cables on the Formosa 1 Phase 2 offshore wind farm in Taiwan. Under the EPCI contract, Jan De Nul installed 17 inter-array and three export cables at the 120MW offshore wind farm. According to the company, at the beach landing, the […]

  • 20 August 2019
    Wind Farm Update

    Jan De Nul has completed the installation of all 20 turbine foundations at the Formosa 1 Phase 2 offshore wind farm in Taiwan. Seaway Yudin began installing the foundations at the beginning of June at the project site some 6km off the west coast of the Miaoli district in the Taiwan Strait. Germany’s EEW SPC produced the monopiles and Thailand’s CUEL Limited manufactured […]

  • 15 October 2019
    Grid Connection

    Correll Services has completed the subsea and land cable termination and testing works at the Formosa 1 Phase 2 offshore wind farm in Taiwan. Correll Services was in charge of project documentation, export cable (HV & FO) jointing at the TJB and OSS, array cable terminations (HV & FO) on 22 assets, and post-installation testing from […]

  • 3 April 2018
    Business & Finance, Contracts & Tenders, Wind Farm Update

    Siemens Gamesa Renewable Energy (SGRE) has been contracted to supply an additional 120MW of capacity for the Formosa 1 Phase 2 offshore wind farm in Taiwan, with the installation of the 20 SWT-6.0-154 wind turbines scheduled to start in 2019.

  • 20 August 2018
    Contracts & Tenders, Operations & Maintenance

    The Thailand-based oil & gas company CUEL Limited has secured a contract with Jan De Nul for the fabrication and supply of 20 transition pieces for the Formosa 1 Phase 2 project in Taiwan, marking its first offshore wind contract.

  • 17 April 2019
    Wind Farm Update

    Ørsted has posted a photo showing the first wind turbine components destined for the Formosa 1 Phase 2 offshore wind farm lined up at the Taichung Port in Taiwan. The first 75m long blades, 378t nacelles and 37m long tower sections began their journey to Taiwan from Aalborg, Denmark, and Cuxhaven, Germany, on board three vessels. Formosa 1 Phase 2 will […]

  • 24 September 2019
    Business & Finance

    Waves Group is currently providing marine warranty surveyor services at the Formosa 1 Phase 2 offshore wind farm in Taiwan. The UK-based company is in charge of providing the marine warranty surveyor services for the installation of turbines, foundations, and infield and export cables. According to Waves Group, the contract began in October last year and will […]

  • 20 March 2019
    Operations & Maintenance, Technology

    SeaRoc has secured a contract to supply its marine management system SeaPlanner to support the construction of the Formosa 1 Phase 2 offshore wind project in Taiwan. The deal comes as part of SeaRoc’s strategic partnership with Specialist Marine Consultants (SMC), which is delivering marine coordination services for the 120MW project. SMC will be responsible for […]

  • 29 November 2019
    Business & Finance

    SeaPlanner, SeaRoc Group’s marine management system, has been selected to support the operations and maintenance phase of the Formosa 1 offshore wind farm in Taiwan. Under the 10-year contract, SeaPlanner will be deployed by the O&M team to coordinate all personnel and marine logistics for the 128MW wind farm. SeaPlanner also supported the construction of […]

  • 9 April 2019
    Wind Farm Update

    All 20 foundation monopiles built for the Formosa 1 Phase 2 have left the EEW SPC yard in Germany onboard two heavy load transport vessels and are en route to Taichung port in Taiwan, Jan De Nul said. Now that these components for the offshore construction are mobilized, the actual installation operations on site can be kicked […]

  • 17 May 2018
    Contracts & Tenders, Wind Farm Update

    Jan De Nul has won a contract for the design, procurement and installation of the wind turbine foundations for the 120MW Formosa 1 Phase 2 wind farm offshore Taiwan.