Search results for: Haliade-X

386 results

A list of search results

  • 8 June 2023
    Wind Farm Update

    Offshore works have begun at the 800 MW Vineyard Wind 1 offshore wind farm in the US with the first of 62 foundations installed by DEME’s specialised floating installation vessel Orion. Vineyard Wind 1 is the first commercial-scale offshore wind farm in the country and the first of several US wind farm projects in DEME’s […]

  • 10 April 2023
    Business & Finance, Grid Connection, Wind Farm Update

    Prysmian’s cable-laying barge Ulisse has resumed cable-laying operations at the first U.S. large-scale offshore wind project, located off the coast of Massachusetts. According to the project’s latest mariner update, cable laying operations of the mid-section cable for the Vineyard Wind 1 project were set to kick off on or about 9 April and continue through […]

  • 5 January 2023
    Technology

    Wind energy generation technology is one of the hottest topics on offshoreWIND.biz year after year and 2022 was no different. Over the past twelve months, various updates made headlines, from upgrades to existing platforms and rolling out new models to securing pilot projects for novel designs. Further below, you can find an overview of our […]

  • 7 January 2020
    Business & Finance

    The Maryland Public Service Commission (PSC) is holding a public hearing on the potential impact of bigger turbines at the Skipjack and MarWin offshore wind projects. The event is part of the commission’s limited inquiry into impacts related to changes in the turbine sizes originally anticipated for use at the two offshore wind projects. The […]

  • 16 February 2021
    Wind Farm Update

    The first nacelle for a GE Haliade 6 MW wind turbine for the French Saint-Nazaire offshore wind farm has arrived at the project’s pre-assembly site in the Port of Saint-Nazaire. The nacelles are being produced in GE Renewable Energy’s factory in Montoir-de-Bretagne, from where the next units will be sent off to the wind turbine pre-assembly […]

  • 23 June 2021
    Wind Farm Update

    Fugro is set to commence a geophysical survey at the Dogger Bank B offshore wind farm in the UK today, 23 June. Survey vessel Fugro Froneiter will be conducting the survey between 23 June and approximately 30 August. Operations will be continuous, 24 hours a day, with the vessel towing subsea sensors up to approximately […]

  • 6 March 2020
    Business & Finance

    Ørsted U.S. Offshore Wind has signed a Memorandum of Understanding (MoU) with the Montclair State University in New Jersey for clean energy research and educational outreach activities. Ørsted’s USD 200,000 contribution will support the university’s Clean Energy and Sustainability Analytics Center (CESAC) and will aid in the advancement of energy research initiatives. The MoU also […]

  • 17 February 2021
    Contracts & Tenders, Grid Connection

    Aibel and Hitachi ABB Power Grids have been awarded contracts for the third phase of the 3.6 GW Dogger Bank Wind Farm development, Dogger Bank C. Under an EPC contract, Aibel will deliver a third converter platform for the world’s largest offshore wind farm. In October 2019, the company was selected to deliver two platforms for the […]

  • 1 January 2019

    The Offshore WIND editorial staff brings the most read articles in 2018 chosen by you, our readers.

  • 9 March 2021
    Authorities, Wind Farm Update

    The U.S. Bureau of Ocean Energy Management’s (BOEM) has released the Final Environmental Impact Statement (FEIS) for the Vineyard Wind 1 project in Massachusetts and has thus put the offshore wind farm one step away from completing the federal permitting process. The only thing now left before construction on the project could begin is a […]

  • 20 December 2022
    Vessels

    Jan De Nul has taken delivery of its jack-up vessel, Voltaire, from the COSCO Shipping Shipyard in China. The vessel had been delivered by the shipyard on 15 December, and departed for Dubai on the morning of Tuesday, 20 December. Designed in-house, Voltaire will be used to transport, lift and install offshore wind turbines, transition pieces, and […]

  • 30 September 2019
    R&D, Technology

    GE Global Research has been awarded USD 2.8 million through the US Department of Energy’s Advanced Research Projects Agency-Energy (ARPA-E), which will go towards design and development of optimized controls for a lightweight 12MW floating offshore wind turbine. ARPA-E funding was provided by their newest program, Aerodynamic Turbines, Lighter and Afloat, with Nautical Technologies and […]

  • 1 January 2021
    Authorities, Business & Finance, Technology, Wind Farm Update

    As we said our goodbyes to 2020, a lot of us will look back on a challenging year, but also a year which drew resilience, agility and the power of powering through into the spotlight. The same goes for the offshore wind industry, which met its fair share of challenges, but continued delivering in the […]

  • 1 October 2020
    Contracts & Tenders, Grid Connection, Wind Farm Update

    Hellenic Cables has secured a contract with DEME Offshore to supply the inter-array cables and accessories for the Dogger Bank offshore wind farm in the UK. Hellenic Cables will design, manufacture, test and supply approximately 650 km of 66 kV XLPE-insulated inter-array cables and associated accessories for the project’s A & B phases. The contract […]

  • 13 February 2023
    Wind Farm Update

    Windar Renovables has announced that the first transition piece has been upended for the 800 MW Vineyard Wind I offshore wind farm in the United States. First of a total of 62 transition pieces to be manufactured by Windar Renovables has been already upended in the Port of Avilés in Spain. In 2019, Windar Renovables […]

  • 14 March 2022
    Vessels

    Jan De Nul’s next-generation jack-up installation vessel, the Voltaire, has been fitted with the main crane of more than 3,000 tonnes – the largest Leg Encircling Crane ever built. Featuring a crane house weighing 1,800 tonnes, a boom length of 140 metres, and weighing 800 tonnes, the Huisman crane will use a Universal Quick Connector […]

  • 14 March 2023
    Wind Farm Update

    Several subsea operations are scheduled to soon commence at the sites of the first two phases of the Dogger Bank Wind Farm, currently under construction off the North East coast of England. Later this month, NKT will begin nearshore intervention works in support of the installation of the Dogger Bank B export cable in the […]

  • 25 April 2022
    Business & Finance, Wind Farm Update

    UK-based marine consultant Waves Group Ltd (Waves Group) has secured the Marine Warranty Surveyor (MWS) contract for the construction of the 1.2 GW Dogger Bank C wind farm offshore England. This is the company’s third win of the three project phases as they’re currently providing MWS services for Dogger Bank A and B. The third […]

  • 7 April 2021
    Contracts & Tenders, Wind Farm Update

    Spanish manufacturer of rolled rings euskalforging has won a contract to deliver flanges for the 1.2 GW Dogger Bank A offshore wind farm. Under the contract, euskalforging will roll, heat treat, machine, and deliver flanges for all the 95 monopile foundations and transition pieces of the Dogger Bank A. According to the company, this will […]

  • 19 June 2019

    Siemens Gamesa and MHI Vestas control the global offshore wind turbine original equipment manufacturer (OEM) sector with more than 60% cumulative share expected by 2023, according to recent research from Wood Mackenzie Power & Renewables. In order to win market share from competitors, GE must focus on commercialising the Haliade-X 12MW-220 wind turbine in forthcoming auctions, […]

  • 25 April 2022
    R&D, Technology

    GE Renewable Energy and Offshore Renewable Energy (ORE) Catapult have successfully tested a six-legged robot that the companies say could bring the wind industry over GBP 250 million in savings annually. Funded by Innovative UK, the project also brought together UK small and medium-sized enterprises (SMEs) BladeBUG and EchoBolt. The testing showed how a robot […]

  • 21 December 2022
    Contracts & Tenders, Wind Farm Update

    Spain-based manufacturer of rolled rings euskalforging has won a contract to produce flanges for the 1.2 GW Dogger Bank C offshore wind farm. Under the contract, the company will ring roll 87 rings for transition pieces and 87 rings for monopiles with an outside diameter larger than 8 metres. Dogger Bank Wind Farm is being built […]

  • 5 December 2022
    Contracts & Tenders, Wind Farm Update

    The first of the 62 transition pieces to be built for Vineyard Wind 1, the first commercial-scale offshore wind project in the United States, has been transferred on 2 December from the Windar Renovables’ offshore facilities (Tadarsa Eólica 4) to the Port of Avilés, Spain. In 2019, Windar Renovables won a contract to manufacture, certify, […]

  • 17 April 2020
    Vessels

    Swire Blue Ocean (SBO) has commenced the installation of the new crane boom onboard its jack-up vessel Pacific Osprey. The 422-tonne boom was lifted onto the vessel in the Port of Esbjerg, Denmark, yesterday morning with the help of two shore cranes and locked to the base of the crane, SBO said. According to the […]

  • 17 April 2019
    Contracts & Tenders, Wind Farm Update

    GE Renewable Energy has signed a memorandum of understanding with Eolien Maritime France (EMF) to provide and service Haliade 150-6MW turbines to the first French EMF offshore wind farm to be cleared of any legal recourse. This memorandum of understanding terminates GE’s exclusive supplier status on the two other projects carried out by EMF for […]

  • 20 November 2018
    Contracts & Tenders, Operations & Maintenance, R&D, Technology

    GE Renewable Energy and the UK’s Offshore Renewable Energy (ORE) Catapult have formed a GBP 9 million four-year research partnership aimed at minimising the time people have to spend offshore and aimed at enhancing both safety and operating costs for offshore wind farms.