489 results found for 'Haliade-X'

489 results found for 'Haliade-X'
Order results by

A list of search results

  • Giant Haliade-X 12MW Blade Comes Together

    18 April 2019
    R&D

    LM Wind Power has produced the first blade for GE’s Haliade-X 12MW offshore wind turbine at its factory in Cherbourg, France. According to LM Wind Power, the 107m long blade, the world’s largest, has completed the molding process. The LM 107.0 P will now proceed with post-molding finishing touches, before undergoing testing and validation to demonstrate its ability […]

  • Haliade-X 12 MW Prototype Coming in 2019

    5 June 2018
    R&D, Technology

    A full prototype Haliade-X 12 MW wind turbine will be installed at a yet-to-be-determined site in 2019, GE Renewable Energy said.

  • ORE Catapult Welcomes Haliade-X 12MW Blade

    15 August 2019
    Technology

    The first LM 107.0 P blade for GE’s Haliade-X 12MW turbine has arrived at Offshore Renewable Energy (ORE) Catapult’s testing site in Blyth, the UK. Over the coming months, the blade will undergo advanced testing procedures, with static and fatigue tests to demonstrate its ability to withstand peak wind conditions and simulate its readiness for […]

  • Haliade-X 12 MW Turbine Tower Rising

    3 July 2019
    R&D, Technology

    GE Renewable Energy has installed three out of four tower sections which will support the prototype Haliade-X 12 MW wind turbine at Maasvlakte in the Port of Rotterdam, the Netherlands. The final tower section will be installed once the nacelle arrives at Maasvlakte during the summer, GE Renewable Energy said. The Haliade-X 12 MW nacelle […]

  • First Haliade-X 12MW Blade Goes for Testing

    14 August 2019
    Business & Finance

    LM Wind Power has sent off the first 107m long blade for GE’s Haliade-X 12MW turbine from its factory in Cherbourg, France, to the UK where it will undergo testing. The LM 107.0 P blade, the world’s largest, was loaded onto a vessel on 13 August in the Cherbourg harbor and began its journey to the […]

  • GE Haliade – X Prototype Gets a Power Boost

    22 October 2020
    R&D, Technology

    GE Renewable Energy’s Haliade-X prototype, the world’s most powerful wind turbine operating to date, has been optimized and is now operating at a 13 MW power output. During the following months, the prototype operating in the Port of Rotterdam will undergo a series of tests to perform different types of measurements and obtain its type […]

  • GE Haliade-X 12MW Notches Another Milestone

    18 June 2020
    Technology

    GE’s Haliade-X 12 MW offshore wind turbine prototype has obtained a provisional type certificate by DNV GL. According to GE, this certification demonstrates that the Haliade-X prototype has the highest safety and quality standards. The company expects the full type certificate in the coming months. “This is a very important milestone for us as it confirms […]

  • GE Haliade-X Offshore Wind Turbine Reaches 14 MW Output

    5 October 2021
    R&D, Technology

    GE Renewable Energy’s Haliade-X prototype in Rotterdam, the Netherlands, has started operating at 14 MW. With this new milestone, GE Renewable Energy becomes the first industry player to operate a turbine at this power output, the turbine maker said. The Haliade-X 14 MW is an uprated version of the Haliade-X 13 MW, which received its […]

  • Trump Administration Moves to Vacate Federal Approval for Maryland Offshore Wind Project

    15 September 2025
    Authorities, Fixed-Bottom, Planning & Permitting, Project Updates, Wind Farm Update

    [NOTE: Article updated on 16 September with a statement from US Wind and to specify project capacity as 1.7 GW.] The US Department of the Interior (DOI) has filed a motion in the US District Court in Maryland to remand and/or vacate its approval of the Construction and Operations Plan (COP) for US Wind’s 1.7 […]

  • GE’s Haliade-X 14.7 MW Offshore Wind Turbine Type-Certified

    15 December 2022
    Technology

    GE Renewable Energy has received a full type certificate from DNV for its Haliade-X offshore wind turbine for operations up to 14.7 MW. This type certification follows an earlier certification that the Haliade-X could operate at up to 13.6 MW and makes the Haliade-X the most powerful turbine with a full type certification, according to […]

  • Haliade-X 12 MW Nacelle Touches Down in UK

    13 November 2019
    R&D, Technology

    A nacelle from GE Renewable Energy’s Haliade-X 12 MW offshore wind turbine has arrived at the Offshore Renewable Energy (ORE) Catapult’s testing facility in Blyth, Northumberland, ahead of a testing programme designed to prepare it for years of operation at sea. This nacelle, comparable in size to six double-decker London buses, will undergo full indoor […]

  • Royal HaskoningDHV Designs Haliade-X 12MW Foundation

    15 April 2019
    Contracts & Tenders

    GE Renewable Energy and GMB Civiel BV have selected Royal HaskoningDHV to provide the foundation design for Haliade-X 12MW, the world’s most powerful offshore wind turbine. The design is based on a piled foundation, with a large concrete block on top and a 28m diameter, said to meet the technical requirements without over-dimensioning. RHDHV said that […]

  • GE Unveils Operation Haliade-X 12 MW

    1 March 2018
    Business & Finance, R&D, Technology

    GE Renewable Energy GE will invest more than USD 400 million over the next three to five years to develop and deploy the largest, most powerful offshore wind turbine – the Haliade-X 12 MW.

  • Vattenfall and GE to Form Haliade-X 12MW Alliance

    16 May 2019
    Business & Finance, Technology

    Vattenfall and GE Renewable Energy plan to join forces in the deployment of GE’s new wind turbine, the Haliade-X 12 MW, in Europe. With a capacity of 12MW, the Haliade-X is the largest offshore wind turbine on the market to date. Development and production of the new 12MW turbine will mostly take place in France. […]

  • Haliade-X 12 MW Cable Link In Place

    17 July 2019
    Grid Connection, Technology

    Visser & Smit Hanab has completed the cable connection which will link the prototype Haliade-X 12 MW wind turbine at Maasvlakte 2 in the Port of Rotterdam to the Stedin high-voltage station. The 1.5-kilometre, 66kV connection was tested on 16 and 17 July, after which it was put into operation, Visser & Smit Hanab said. GE Renewable […]

  • GE Vernova to Build Up to 18 MW Offshore Wind Test Turbine in Norway

    4 July 2025
    Business development, R&D, Research & Development, Technology

    The Norwegian Water Resources and Energy Directorate (NVE) has granted GE Vernova’s subsidiary Georgine Wind permission to build and operate an 18 MW test turbine in Gulen municipality. The project, which is part of a test programme to advance offshore wind technology, will feature an up to 18 MW turbine, with a maximum tip height […]

  • GE Haliade-X 12MW Prototype Finds Home in Rotterdam

    16 January 2019
    Business & Finance, Technology

    GE Renewable Energy and Future Wind, a joint venture of Pondera Development and Sif, have signed an agreement to install the first Haliade-X 12MW wind turbine prototype in the Port of Rotterdam this summer. The agreement, which will see the Haliade-X 12MW prototype installed onshore to facilitate access for testing, includes five years of testing and […]

  • GE Haliade-X Wind Turbine Now Typhoon-Proof

    29 April 2021
    Technology

    GE Renewable Energy has secured Typhoon certification (Class T certification) from DNV for the Haliade-X offshore wind turbine. The certificate shows that the Haliade-X can operate safely and efficiently under extreme wind conditions which can often be found in Asia but also in the U.S., where hurricanes occur every year, the turbine maker said. ”Typhoon […]

  • GE Haliade-X Prototype Completes Second Year in Operation

    9 November 2021
    R&D, Technology

    GE Renewable Energy’s Haliade-X offshore wind turbine prototype installed in Rotterdam, the Netherlands, has been operating for two years, making it the first 10+ MW offshore wind turbine to achieve this milestone, the turbine maker said. The prototype was first commissioned in November 2019 at 12 MW. Since then, GE Renewable Energy has uprated the […]

  • Heatex to Keep GE Haliade-X Wind Turbines Cool

    3 March 2021
    Technology

    GE Renewable Energy has selected Heatex as the supplier of the generator cooling system for the Haliade-X offshore wind turbine. Heatex, a cleantech company specialized in air-to-air heat exchangers, will supply the generator cooling system consisting of heat exchangers and surrounding auxiliary components. Following a technical collaboration between GE and Heatex, focussed on optimizing the […]

  • GE Haliade-X 12MW Blade Arrives in US for Testing

    6 November 2019
    R&D, Technology

    The blade for GE’s Haliade-X 12MW offshore wind turbine has arrived at MassCEC’s Wind Technology Testing Center (WTTC) in Boston, U.S. The 107m long blade will undergo a series of fatigue tests that include moving it millions of times during a few months to validate that it can withstand more than 25 years of operation […]

  • First Haliade X- 12MW Blade Arrives at Rotterdam Port

    10 October 2019
    R&D

    The first blade for the prototype GE Haliade-X 12 MW offshore wind turbine has arrived at Maasvlakte, according to the live webcam feed at the Port of Rotterdam. LM Wind Power is producing the 107m blades for the prototype turbine at its plant in Cherbourgh, France. According to ECN, part of TNO,  the measurement mast and the scanning LiDAR have been […]

  • GE Goes Into Haliade-X 12 MW Details (Infographics)

    10 May 2018
    Technology

    GE Renewable Energy has revealed additional details on the size and power of the Haliade-X 12 MW offshore wind turbine.

  • Photo of the Day: Maasvlakte Getting Ready for Haliade-X 12MW

    12 April 2019
    Ports & Logistics

    GE Renewable Energy is currently preparing the site in Maasvlakte, the Netherlands, for installation of its Haliade-X 12MW wind turbine prototype. Preparations of the site which will host the world’s most powerful offshore wind turbine are being carried out in partnership with Future Wind. The two companies signed an agreement at the beginning of the year […]

  • Dutch Magnetic Assemblies for Dogger Bank Haliade-X Turbines

    13 April 2021
    Contracts & Tenders, Technology

    Bakker Magnetics is about to start the production of magnetic assemblies for the GE Haliade-X turbines that will be installed at the 3.6 GW Dogger Bank offshore wind project in the UK. Bakker Magnetics will fabricate and assemble magnetic assemblies for the turbines across all three phases of what is the world’s largest offshore wind […]

  • First Giant Haliade-X 12MW Blade Rolls Out

    21 June 2019
    Ports & Logistics

    LM Wind Power has rolled out the first blade for GE’s Haliade-X 12MW offshore wind turbine at its factory in Cherbourg, France. According to the company, the 107m long blade, the world’s largest, has made its first trip outside the factory. Final preparations for the shipment of the LM 107.0 P blade to Maasvlakte-Rotterdam in the Netherlands are now […]