439 results found for 'Haliade-X '

439 results found for 'Haliade-X '
Order results by

A list of search results

  • GE Vernova Slimming Down Offshore Wind Business, Move Could Impact 900 Employees

    2 October 2024
    Business & Finance, Supply Chain, Wind Turbines

    Some 900 jobs in GE Vernova’s offshore wind business unit could be lost as the company plans to downsize the business. “On September 19, we submitted a proposal to the GE Vernova European Works Council related to proposed changes in our Offshore Wind business globally. The proposal reflects industry wide challenges for wind and aims […]

  • Petrobras to Start Major Offshore Wind Measurement Campaign Using Brazil-Made Floating LiDARs

    30 October 2024
    Fixed-Bottom, Floating Wind, Planning & Permitting

    Brazil’s oil and gas major, Petrobras, will deploy five new units of a Brazil-made floating LiDAR for wind measurements off the country’s coasts starting this December. The company will invest BRL 60 million (approximately EUR 9.6 million) in the new measurement campaign which follows a one-year deployment of the first floating LiDAR buoy, called Bravo, […]

  • Test Bench for 35 MW Wind Turbines Goes Into Operation in China

    17 October 2024
    R&D, Technology

    Shortly after Dongfang reported that the company produced the world’s first 26 MW offshore wind turbine, China’s Sany Renewable Energy announced a test rig for turbines of up to 35 MW was put into operation at the firm’s wind power testing centre. Sany said that “China’s first and the world’s largest” test bench utilises a […]

  • Invenergy, energyRe Face Turbine Supplier Issues, Hit Pause on 2.4 GW Wind Project Offshore New Jersey

    5 September 2024
    Business & Finance, Business development, Fixed-Bottom, Project Updates, Research & Development, Wind Farm Update

    Invenergy Wind Offshore (Invenergy) has requested a delay from the New Jersey Board of Public Utilities (NJBPU) until late December for its proposed 2.4 GW offshore wind project near Long Beach Island. In a July filing with the board, the company, which is developing the wind farm together with energyRe, cited challenges in finding a […]

  • Blade Failure at Dogger Bank A Tied to Commissioning Process, GE Vernova Says

    2 September 2024
    Fixed-Bottom, Project Updates, Wind Farm Update

    The blade failure event at the Dogger Bank A offshore wind farm last month was not caused by an installation or manufacturing issue but happened during the commissioning process, according to an analysis conducted by GE Vernova. The blade failure occurred on the morning of 22 August and, according to an update from the Dogger […]

  • Bad Streak for GE Vernova as Another Blade Fails at Dogger Bank Offshore Wind Farm in UK

    23 August 2024
    Fixed-Bottom, Manufacturing, Supply Chain, Wind Farm Update, Wind Turbines

    This article was updated at 15:05 CET on 23 August 2024 with a statement from GE Vernova. One of the already installed wind turbine blades at Dogger Bank A offshore wind farm, currently under construction in the UK, has sustained damage and failed. The blade failure occurred on the morning of 22 August and, according […]

  • ABL Secures Work on French Offshore Grid Connections

    9 October 2024
    Business & Finance, Grid Connection

    Energy and marine consultancy company, ABL, has been appointed as marine warranty surveyor (MWS) to support the marine transportation and installation (T&I) operations for the Centre Manche 1 and Centre Manche 2 offshore substations in France. Centre Manche 1 and Centre Manche 2 are part of two offshore wind projects – Appel d’Offre 4 (AO4) […]

  • RWE to Enter Cancelled New York Project Into One of Upcoming Offshore Wind Solicitations

    14 August 2024
    Business & Finance, Fixed-Bottom, Project Updates, Wind Farm Update

    RWE plans to participate in one of the upcoming offshore wind solicitations in New York with its 1,314 MW Community Offshore Wind project, one of the three cancelled earlier this year as GE Vernova dropped plans for the 18 MW Haliade-X wind turbine which was planned to be used in the projects. Community Offshore Wind […]

  • 27 GE Haliade-X Wind Turbines Installed at Dogger Bank A

    26 July 2024
    Project Updates, Supply Chain, Wind Farm Update, Wind Turbines

    More than a quarter of wind turbines at Dogger Bank A, the first phase of the UK’s 3.6 GW Dogger Bank Wind Farm, have been installed. So far, 27 of the 95 GE Haliade-X 13 MW wind turbines that Dogger Bank A will comprise are in place, according to information in Equinor’s results for the […]

  • Macquarie Taking Over Danish Offshore Wind O&M Provider

    30 September 2024
    Business & Finance, Fixed-Bottom, Operations & Maintenance, Vessels

    Macquarie Asset Management is set to acquire 100 ownership of Ziton, a Denmark-based provider of operations and maintenance (O&M) services to the offshore wind industry. Macquarie European Infrastructure Fund 7, advised by Macquarie Asset Management, has entered into a share purchase agreement with funds advised by Permira Credit and other existing shareholders to acquire all […]

  • BSEE Allows Vineyard Wind to Resume Tower, Nacelle Installation

    14 August 2024
    Authorities, Fixed-Bottom, Project Updates, Wind Farm Update

    The US Bureau of Safety and Environmental Enforcement (BSEE) has allowed Vineyard Wind to resume certain limited additional activities at the Vineyard Wind 1 offshore wind farm site. These include the installation of towers and nacelles but not (yet) the installation of the wind turbine blades. BSEE issued an update to the Suspension Order the […]

  • The Rise of Haliade-X 12MW (Video)

    12 November 2019
    Technology

    GE Renewable Energy has posted a video showing the installation time-lapse of the Haliade-X 12MW wind turbine at Maasvlakte, the Port of Rotterdam. This content is available after accepting the cookies. Change cookie-settings View on Youtube. The GE Haliade-X 12MW prototype wind turbine produced its first power at the beginning of November. It features three […]

  • Haliade X- 12MW Prototype Nearly Done

    16 October 2019
    Technology

    The third and final 107m blade has arrived in the Port of Rotterdam and is awaiting to be installed on the prototype GE Haliade-X 12MW offshore wind turbine. To remind, the first blade was installed on the Haliade-X 12MW turbine located at Sif’s Maasvlakte 2 terminal on 14 October, with the second piece following the day […]

  • GE Haliade-X 12MW on UK Tour

    26 April 2019
    Business & Finance

    GE Renewable Energy is holding a series of supply chain engagement events in the UK for its Haliade-X 12MW offshore wind turbine. The events are part of GE’s supply chain plan for the world’s most powerful offshore wind turbine and will welcome potential suppliers that have suitable products or services that could support its production. GE […]

  • Eneco Buys Power from GE Haliade-X 12MW Prototype

    17 December 2019
    Business & Finance

    Dutch energy company Eneco is set to purchase all the electricity generated by GE’s Haliade-X 12MW offshore wind turbine prototype. This was announced during the inauguration ceremony for the prototype held today, 17 December, at the port of Maasvlakte-Rotterdam. According to GE, the Haliade-X 12MW prototype set a new world record the past weekend by […]

  • First Blade Installed on Haliade-X 12MW

    14 October 2019
    Technology

    The first blade has been installed on the prototype GE Haliade-X 12MW offshore wind turbine in Maasvlakte, according to the live webcam feed at the Port of Rotterdam. LM Wind Power is producing the 107m blades, the world’s largest, at its plant in Cherbourgh, France. The first piece was rolled out in June. To remind, GE Renewable Energy announced in March last year that […]

  • GE Haliade-X 12MW Comes to China

    13 November 2019
    Technology

    GE Renewable Energy has signed a cooperation agreement with State Power Investment Corp (SPIC) to bring the Haliade-X 12MW offshore wind turbine to China. GE announced in March last year that it will invest more than USD 400 million to develop and deploy Haliade-X 12MW, the world’s most powerful offshore wind turbine. The first unit was installed […]

  • Haliade-X 12MW Nacelle Departs for Rotterdam

    13 August 2019
    Technology

    GE Renewable Energy has sent off the nacelle of the Haliade-X 12MW offshore wind turbine from its production site in Saint-Nazaire, France, to Rotterdam, the Netherlands. The Haliade-X 12MW components will be assembled in Rotterdam-Maasvlakte, after which the turbine will be installed onshore to facilitate access for testing during the initial period of operations. This initial phase is expected […]

  • GE’s Haliade-X 14.7 MW Offshore Wind Turbine Type-Certified

    15 December 2022
    Technology

    GE Renewable Energy has received a full type certificate from DNV for its Haliade-X offshore wind turbine for operations up to 14.7 MW. This type certification follows an earlier certification that the Haliade-X could operate at up to 13.6 MW and makes the Haliade-X the most powerful turbine with a full type certification, according to […]

  • Haliade X- 12MW Prototype Stands Complete

    17 October 2019
    Technology

    The third and final 107m blade has been installed on the prototype GE Haliade-X 12MW offshore wind turbine in Maasvlakte, the Port of Rotterdam. The first blade was installed on the Haliade-X 12MW turbine located at Sif’s Maasvlakte 2 terminal on 14 October, with the second piece following the day later. LM Wind Power manufactured the 107m blades, the world’s largest, at its […]

  • Haliade-X 12 MW Prototype Coming in 2019

    5 June 2018
    R&D, Technology

    A full prototype Haliade-X 12 MW wind turbine will be installed at a yet-to-be-determined site in 2019, GE Renewable Energy said.

  • GE Haliade-X Offshore Wind Turbine Reaches 14 MW Output

    5 October 2021
    R&D, Technology

    GE Renewable Energy’s Haliade-X prototype in Rotterdam, the Netherlands, has started operating at 14 MW. With this new milestone, GE Renewable Energy becomes the first industry player to operate a turbine at this power output, the turbine maker said. The Haliade-X 14 MW is an uprated version of the Haliade-X 13 MW, which received its […]

  • First Haliade-X 12MW Blade Goes for Testing

    14 August 2019
    Business & Finance

    LM Wind Power has sent off the first 107m long blade for GE’s Haliade-X 12MW turbine from its factory in Cherbourg, France, to the UK where it will undergo testing. The LM 107.0 P blade, the world’s largest, was loaded onto a vessel on 13 August in the Cherbourg harbor and began its journey to the […]

  • Giant Haliade-X 12MW Blade Comes Together

    18 April 2019
    R&D

    LM Wind Power has produced the first blade for GE’s Haliade-X 12MW offshore wind turbine at its factory in Cherbourg, France. According to LM Wind Power, the 107m long blade, the world’s largest, has completed the molding process. The LM 107.0 P will now proceed with post-molding finishing touches, before undergoing testing and validation to demonstrate its ability […]

  • GE Haliade-X 12MW Prototype Finds Home in Rotterdam

    16 January 2019
    Business & Finance, Technology

    GE Renewable Energy and Future Wind, a joint venture of Pondera Development and Sif, have signed an agreement to install the first Haliade-X 12MW wind turbine prototype in the Port of Rotterdam this summer. The agreement, which will see the Haliade-X 12MW prototype installed onshore to facilitate access for testing, includes five years of testing and […]

  • GE Haliade – X Prototype Gets a Power Boost

    22 October 2020
    R&D, Technology

    GE Renewable Energy’s Haliade-X prototype, the world’s most powerful wind turbine operating to date, has been optimized and is now operating at a 13 MW power output. During the following months, the prototype operating in the Port of Rotterdam will undergo a series of tests to perform different types of measurements and obtain its type […]