Search results for: Ijmuiden ver

142 results

A list of search results

  • 4 February 2021
    Grid Connection

    Dutch transmission system operator TenneT has opened a tender procedure for a geotechnical soil investigation at the 4 GW IJmuiden Ver offshore wind site. TenneT seeks geotechnical information on two, optionally three, platform locations at IJmuiden Ver which are suitable to progress the design and installation requirements for offshore high voltage substations. The geotechnical soil […]

  • 28 January 2021
    Environment

    The Netherlands Enterprise Agency (RVO.nl) and Fugro are taking steps to make seabed research at the IJmuiden Ver offshore wind farm zone more sustainable. According to the parties, Fugro’s research vessel Despina will blend biofuels with existing fuel during the survey work and thus save approximately 400 tonnes of CO2 emissions. Despina is in charge of […]

  • 8 December 2020
    Contracts & Tenders, Wind Farm Update

    Fugro has won three geotechnical investigation contracts for the 4 GW IJmuiden Ver wind farm zone in the Dutch North Sea. The contracts include seabed investigation, an extensive laboratory testing program, and the development of an integrated ground model. The fieldwork, which comprises seabed cone penetration tests (CPTs), thermal conductivity tests, vibrocores and boreholes, will […]

  • 5 November 2020
    Contracts & Tenders, Wind Farm Update

    Fugro Netherlands Marine BV has won a contract to develop an Integrated Ground Model and a Geotechnical Interpretative Report for the 4 GW IJmuiden Ver wind farm zone in the Dutch North Sea. The IGM and the report should be of sufficient accuracy to allow (preliminary) foundation design, the Netherlands Enterprise Agency (RVO), the issuer […]

  • 1 September 2020
    Contracts & Tenders

    As announced in July, the Netherlands Enterprise Agency (RVO), has now issued an invitation to tender for geotechnical soil investigations at the IJmuiden Ver Wind Farm Zone (IJVWFZ), located some 62 kilometres off the Dutch coast. The tender is divided into two lots, one to be awarded for seabed Core Penetration Testing (CPT) and the […]

  • 24 July 2020
    Contracts & Tenders

    The Netherlands Enterprise Agency (RVO) is preparing to issue a call for tenders for geotechnical soil investigations at the IJmuiden Ver offshore wind farm zone. The tender, expected to be open on 31 August, will be divided into two lots. The first lot will entail seabed Core Penetration Testing (CPT), while the second lot will […]

  • 20 July 2020
    Contracts & Tenders, Wind Farm Update

    The Netherlands Enterprise Agency (RVO) has issued a tender for the development of an integrated ground model for the 4 GW IJmuiden Ver wind farm zone. The objective of this tender is to conclude an agreement with a tenderer who is able to develop an Integrated Ground Model (IGM) and a Geotechnical Interpretative Report for […]

  • 26 June 2020
    Contracts & Tenders, Wind Farm Update

    The Netherlands Enterprise Agency (RVO) plans to issue a tender for the development of an integrated ground model for the 4 GW IJmuiden Ver wind farm zone in July. This integrated ground model should be of sufficient accuracy to allow (preliminary) foundation design, RVO said. The deliverables of this assignment will be made available to […]

  • 19 June 2020
    Contracts & Tenders, Wind Farm Update

    The Netherlands Enterprise Agency (RVO.nl) has awarded GEOxyz BVBA with the contract to carry out geophysical surveys at the IJmuiden Ver offshore wind zone. Under the contract, GEOxyz will conduct geophysical investigations required to obtain the soil information at a part of the Ijmuiden Ver zone in the Dutch North Sea. The acquired soil information […]

  • 18 June 2020
    Contracts & Tenders

    The Netherlands Enterprise Agency (RVO) has contracted BLIX, a Utrecht-based consultancy company, to support soil investigation at the IJmuiden Ver Wind Farm Zone. The company will supervise the soil investigation works for the 4 GW wind farm zone and, together with Reynolds International, RPS Group and Wind Support, obtain offshore soil data. The consultancy and […]

  • 13 May 2020
    Authorities, Contracts & Tenders

    The Netherlands Enterprise Agency (RVO) has issued a tender call for Client Offshore Representatives for the geotechnical investigations at IJmuiden Ver Wind Farm Zone and, possibly, at a neighbouring wind farm zone. The tender was opened on 12 May, as announced in early information ROV issued in April. The deadline for submitting bids is 26 […]

  • 3 March 2020
    Contracts & Tenders, Grid Connection

    TenneT TSO B.V. and Iv-Offshore & Energy B.V. have signed a contract for the Front End Engineering and Design (FEED) of the first 525kV offshore grid connection. The FEED is part of the development of a new standard design for two 2GW network connections to the IJmuiden Ver wind farms. The two High Voltage Direct […]

  • 3 December 2019
    Contracts & Tenders

    The Netherlands Enterprise Agency (RVO.nl) has issued a tender for geophysical investigations at the IJmuiden Ver offshore wind zone. The contractor will be responsible for carrying out a geophysical survey required to obtain the soil information at a part of the Ijmuiden Ver zone. The contract will begin on 25 February 2020 and end on […]

  • 15 November 2019
    Grid Connection, R&D, Technology

    Transmission system operator TenneT plans to cover a portion of the costs needed to develop a submarine cable system for the two 2GW IJmuiiden Ver offshore grid connection systems. A submarine cable system operating at a voltage level 525 kV DC, using extruded insulation types is needed for these two connection systems. Currently, a submarine […]

  • 16 October 2019
    Contracts & Tenders

    The Netherlands Enterprise Agency (RVO.nl) is planning to issue a tender in November for geophysical investigations at the IJmuiden Ver offshore wind zone. The selected company will be in charge of carrying out a geophysical survey required to obtain the soil information at a part of the Ijmuiden Ver zone. RVO.nl plans to issue the tender on […]

  • 8 April 2019
    Grid Connection

    TenneT is set to deploy two 2GW direct current connections for the IJmuiden Ver offshore wind zone in the Netherlands, the first ever time this capacity is to be used. The connection will see two 525kV cables used, which allows lower costs, smaller space requirements and fewer routes on land, TenneT said. According to the […]

  • 14 March 2019
    Grid Connection

    Dutch transmission system operator TenneT has selected Arcadis and Pondera to carry out an Environmental Impact Assessment (EIA) and provide permit applications with associated investigations for high-voltage connections which will link the IJmuiden Ver wind farm to the grid. The two subsea high-voltage connections will each have the capacity to bring  2GW of energy to land, the […]

  • 27 February 2017
    Contracts & Tenders, Grid Connection

    TenneT is holding market consultation for grid connection concepts for IJmuiden Ver wind energy area, which is farther from the coast than currently developed areas. The company is consulting on HVDC platforms and an artificial island as potential solutions.

  • 15 March 2021
    Ports & Logistics, Wind Farm Update

    Siemens Gamesa has selected DHSS’s offshore logistics terminal in Port of IJmuiden as the marshalling, storage, and logistics facility for the 1.5 GW Hollandse Kust Zuid wind farm zone. This logistics hub of DHSS will be used during the commissioning phase for Siemens Gamesa 140 SG 11.0-200 DD wind turbines which will be installed at […]

  • 25 September 2020
    Ports & Logistics

    DHSS has opened a new support base in the Port of IJmuiden, the Netherlands. Bold Tern visited DHSS’ new base at Volendamkadea, marking the start of the terminal’s first offshore wind project. The installation vessel is preparing for a maintenance campaign at a closeby offshore wind farm. Additionally, two crew transfer vessels (CTVs) will make […]

  • 17 July 2020
    Business & Finance, Ports & Logistics, Wind Farm Update

    Swedish energy company Vattenfall, the developer of the 1.5 GW Hollandse Kust Zuid wind farm in the Dutch North Sea, is joining Amsterdam IJmuiden Offshore Ports (AYOP). By joining this public-private association which gathers more than 85 companies and organizations active in the offshore energy sector in the port area, Vattenfall wants to increase cooperation […]

  • 4 December 2019
    Business & Finance

    Atlas Professionals and Roodenberg Staalkabels have joined Amsterdam IJmuiden Offshore Ports (AYOP), the association for offshore companies in the North Sea Canal region. AYOP stated it now has 79 members in the North Sea Canal region focused on the offshore extraction of oil & gas and wind energy. According to AYOP Chairman Ron Davio, services […]

  • 27 March 2018
    Authorities, Business & Finance, Environment, Grid Connection

    The Dutch government has presented the Offshore Wind Energy Roadmap 2030, setting out plans for the development of additional 7GW of offshore wind capacity in the 2024-2030 period.

  • 30 May 2017

    Amsterdam IJmuiden Offshore Ports Finding innovative business opportunities AYOP promotes the region to companies within the Netherlands and abroad as an ideal place to establish themselves. The arrival of Hollandse Kust wind farms off the coast of IJmuiden makes the region even more interesting to companies. In addition, the association helps members find innovative business […]

  • 15 January 2016
    Vessels

    MPI Offshore’s wind turbine installation vessel (WTIV) MPI Resolution has been contracted by RWE for the removal of the IJmuiden Met Mast. In 2011, RWE installed the 100m high met mast in waters up to about 26m, approximately 85 km off the Dutch coast. The mast was built on a monopile foundation consisting of a […]

  • 23 June 2015
    Technology

    Breman Machinery recently delivered a second monopile gripper to Van Oord. After a success with the first gripper, Van Oord ordered a second gripper at the end of October 2014. The second gripper, measuring 14,5x29x13,5m and weighing 560t, was assembled and tested at Breman’s facility in Ijmuiden. The gripper was partially welded, machined and painted at Breman’s […]