The jacket foundation and the topside for Dogger Bank C, the third phase of the 3.6 GW Dogger Bank Wind Farm, have been installed in the UK. According to the recent Notice to Mariners from the project, Heerema Marine Contractors’ semi-submersible crane vessel Sleipnir installed the jacket foundation
The installation of the offshore substation jacket foundation and topside for the third phase of the Dogger Bank Wind Farm, the world’s biggest offshore wind farm under construction, will commence soon. Heerema Marine Contractors’ semi-submersible crane vessel (SSCV) Sleipnir will install the offsho
The Dutch company, N-Sea Group, has been awarded a contract to repair one of the four export cables that connect the 576 MW Gwynt y Môr offshore wind farm in the UK to the National Grid. N-Sea will be responsible for replacing a five-kilometre section of 132 kV export cable from the onshore transiti
The Offshore TSO Collaboration (OTC), an initiative established in 2022 that gathers transmission system operators (TSOs) from the European Northern Seas, says that a unified and efficient offshore grid development strategy is needed for the North Sea to maximise benefits for Europe’s energy securit
Prysmian has completed the installation and HV testing of the export subsea cables that connect the Sofia offshore wind farm to the UK mainland. The 1.4 GW offshore wind farm comprises more than 440 kilometres of ±320 kV offshore export cables with XLPE insulation, manufactured in Prysmian’s Pikkala
ScottishPower Renewables, part of Iberdrola, has awarded an engineering, procurement, construction, installation, and commissioning (EPCIC) contract to the Dutch company HSM Offshore Energy for the offshore substation and jacket foundation for the East Anglia Two offshore wind farm in the UK. HSM Of
The first of two offshore converter station topsides, planned to be installed at the Hornsea 3 offshore wind farm in the UK, is on its way to Europe following the sailway from Map Ta Phut, Thailand. The topside, completed by Ørsted’s Thailand-based team in partnership with Aibel and Hitachi Energy,
Spain’s Navantia Seanergies has completed the load-out of the High Voltage Direct Current (HVDC) substation jacket for the 1.2 GW Dogger Bank C offshore wind platform in the UK. The load-out of the substation jacket, which will be installed at the Dogger Bank Wind Farm developed by SSE Renewables, E
UK-headquartered Enshore Subsea has secured an export cable installation contract for one of Scotland’s largest offshore wind projects, the 1.1 GW Inch Cape. The Inch Cape offshore wind farm will feature two 85-kilometre, 220 kV, three-phase export cables, each delivered in three sections and requir
Ofgem is inviting tenders to own and operate electricity transmission links worth GBP 4 billion (about EUR 4.8 billion), connecting the Sofia offshore wind farm to Great Britain’s mainland energy network. Ofgem has opened the Offshore Transmission Owner (OFTO) regime Tender Round 12, which invites i
The LionLink interconnector, a subsea cable that will connect the future Nederwiek 3 offshore wind farm in the Netherlands to the UK grid and interconnect the two national power networks, is planned to make landfall in Walberswick on its UK side. On 19 February, National Grid Ventures (NGV) said it
Global Underwater Hub (GUH) has launched a new initiative to tackle subsea cable reliability, a critical factor in offshore wind development, as the UK pushes to meet its clean energy targets. The industry body, representing the UK’s GBP 9.2 billion (around USD 11.3 billion) underwater sector, has p
Seaway7, part of the Subsea7 Group, has awarded Houston-headquartered Helix Robotics Solutions a contract for the burial of inter-array cables at the Hornsea 3 offshore wind farm site in the UK. The contract is expected to last over 300 days and is scheduled to commence in the third quarter of 2026.
Tekmar Group has been awarded a contract for the delivery of its cable protection system (CPS) and associated ancillaries for a UK-based offshore wind project. The contract is valued in the region of GBP 5 million (approximately EUR 6 million). The UK-based company will be responsible for the design
