Ørsted has chosen the Port of Tyne’s Tyne Clean Energy Park in South Shields as the marshalling base for its 2.9 GW Hornsea 3 offshore wind farm in the UK. The Denmark-headquartered Cadeler will use the 100,000-square-metre site to marshal secondary steel components for the offshore wind farm before
More than two years after a fire caused damage, a wind turbine at the Scroby Sands offshore wind farm in the UK is being removed by RWE. In August 2023, turbine T06 at the 58 MW Scroby Sands offshore wind farm caught fire in the nacelle, with the fire extinguishing on its own. Work to […]
The UK government has extended the deadline by three months for a decision on the development consent order for RWE’s 1.1 GW Five Estuaries offshore wind farm. The statutory deadline for the decision on the Five Estuaries offshore wind farm was 17 September 2025. However, the UK Energy Secretary, Ed
Seaway7’s Seaway Strashnov has installed the final monopile at Dogger Bank C, the third phase of the 3.6 GW Dogger Bank Wind Farm, the world’s biggest offshore wind farm under construction, in the UK. This marks the completion of 277 monopile foundations installed by Seaway7 across Dogger Bank A, B,
The 1.5 GW Morgan offshore wind farm, developed by a joint venture between JERA Nex bp and EnBW, has been awarded a development consent by the UK’s Department for Energy Security and Net Zero. The Morgan offshore wind farm is planned to be built off the coast of Cumbria, in the Irish Sea. Once fully
Siemens Gamesa has installed 50 per cent of the recyclable blades at RWE’s Sofia offshore wind farm in the UK, with the turbine manufacturer continuing installation throughout the rest of the year. According to RWE, the company and Siemens Gamesa have achieved the first-ever large-scale installation
Heerema Marine Contractors’ semi-submersible crane vessel (SSCV) Sleipnir has completed the installation of the pin piles and jacket foundation for the East Anglia Three offshore substation at the offshore wind farm’s site in the UK. According to a weekly notice of operations from the developer, Sco
The Export and Investment Fund of Denmark (EIFO) is providing a GBP 500 million (approximately EUR 576 million) finance guarantee to support the development of ScottishPower Renewables’ East Anglia Three offshore wind farm in the UK. EIFO was invited exclusively by Iberdrola to participate in the of
Spain’s Haizea Wind Group has rolled out the first monopile for Ørsted’s 2.9 GW Hornsea 3 offshore wind farm in the UK. The monopile will now undergo its surface treatment before being shipped to the offshore wind farm project, located approximately 120 kilometres off the Norfolk Coast in the North
The Scottish government has granted a consent order for SSE Renewables’ Berwick Bank in the UK, which, if fully developed, would become the world’s largest offshore wind farm. The Section 36 consent determination by Scottish ministers approves the project’s main offshore wind array in the outer Firt
The substation platform and jacket foundation for the Inch Cape offshore wind farm have departed from the Smulders yard in Wallsend, Newcastle, and are en route to their site off the Angus coast in Scotland. The Siemens Energy Offshore Transformer Module (OTM) and its jacket foundation sailed at sun
SeAH Wind has commenced commercial production for its inaugural project, delivering monopile foundations for Ørsted’s 2.9 GW Hornsea 3 offshore wind farm in the UK. The milestone was marked by cutting the first steel plates. This signifies the beginning of operations at SeAH Wind’s facility on Teess
Subsea7 and Saipem have signed a binding merger agreement, kicking off the process of combining the two companies, which is expected to be completed in the second half of 2026 and result in a new offshore energy player named Saipem7. The companies revealed plans to merge in February this year, when
Fugro has completed the first phase of geotechnical site investigations at the Dogger Bank South (DBS) East offshore wind farm site, located over 100 kilometres off the northeastern coast of England. The first round of geotechnical surveys started in May and was carried out by the vessel Fugro Revel
