A list of search results
Offshore Renewable Energy (ORE) Catapult and Synaptec have partnered in a project aimed at reducing the cost of subsea cable failures and accompanying monitoring systems. Synaptec’s Refase technology will be installed at ORE Catapult’s 7MW Levenmouth Demonstration Turbine for a year-long trial to establish cost savings and benefits of using distributed, passive sensors to monitor […]
The installation of inter-array cables at the Formosa 1 Phase 2 offshore wind farm in Taiwan is scheduled to begin in June. Jan De Nul's cable laying vessel Willem de Vlamingh will carry out the installation of 20 cables at the project site from 1 June to 30 September. The Luxembourg-based company is in charge of the design, procurement and […]
Boskalis has won a contract for the offshore export cable installation at Ørsted's Hornsea Project Two offshore wind farm in the UK. Under the contract worth more than EUR 100 million, Boskalis will install three export cable circuits with a total length of approximately 380km. The project scope includes the preparation of the offshore export cable route, […]
The Carbon Trust has revealed the five winners of its dynamic export cable competition, part of the Floating Wind Joint Industry Project (JIP). The winners are the Norwegian Aker Solutions, Japan's Furukawa Electric Co., Greek Hellenic Cables, the UK-based JDR Cable Systems and China's Zhongtian Technology Submarine Cable. Supported by BPP Cables, the competition was launched to address the […]
Tekmar Energy has secured a contract by Boskalis to provide cable protection systems (CPS) for the Triton Knoll offshore wind farm in the UK. Tekmar will provide 196 TekLink Generation 8 systems for protecting the project's inter-array and export cables, and bellmouths for the substations, with its sister company AgileTek Engineering performing engineering analysis. The […]
Sparrows Group Cable and Pipe Lay Solutions (CPLS) division has delivered its largest renewables project through three contracts related to the 1.2GW Hornsea Project One offshore wind farm. The three contracts were awarded through Boskalis (formerly VBMS), DEME Offshore (formerly known as Tideway), and DeepOcean. The work scope saw Sparrows provide equipment and personnel to […]
The Belgium-based Marlinks has secured a contract for monitoring the cable burial depth of the Northwester 2 offshore wind farm. Marlinks will monitor the burial depth of six inter-array cables and one export cable, which will be equipped by the company's distributed temperature sensing (DTS) measurement system. According to Parkwind, the majority owner of the 219MW project, the system uses the […]
Pfisterer has won a contract for the supply of the 220kV land cable accessories for the grid connection of the 950MW Moray East offshore wind farm in Scotland. The company won the contract in cooperation with the cable manufacturer TELE-FONIKA Kable and the international cable and pipeline installation contractor VolkerInfra. Pfisterer will supply the 220kV […]
Tekmar Energy has secured a contract by Jan De Nul to provide its cable protection system (CPS) for the Northwester 2 offshore wind farm in Belgium. Under the agreement, Tekmar will supply its TekLink Mechanical Latch Generation 8 CPS for all of the project's inter-array and export cables. The system will be produced at the company's manufacturing […]
Boskalis subsea cables & flexibles We collaborate closely to understand each project’s particular goals and objectives, eliminating time-consuming interfaces to increase overall efficiency. Our focus on quality balanced with cost effectiveness yields consistently high results, while our focus on safety reduces risks to your operations. To compete in today’s market, any large-scale offshore project needs […]
The South Korean LS Cable & System has won a contract to manufacture submarine power cables for the Yunlin offshore wind farm in Taiwan.
Tideway BV, part of DEME Group, has completed the installation of the export cable at the Hornsea Project One offshore wind farm in the UK.
Boskalis and NKT have secured export cable contracts by 50Hertz for the Ostwind 2 offshore grid connection in Germany.
The consortium of NKT and Boskalis Subsea Cables & Flexibles has signed a Pre-Construction Agreement (PCA) for the delivery and installation of an export cable system for the 784MW Inch Cape offshore wind project in the UK.
French cable maker Nexans has won a contract to provide a subsea export cable system for the nearshore section of Ørsted's 1.4GW Hornsea Project Two offshore wind farm in the UK. The contract is worth over EUR 150 million and will see Nexans supplying 200 kilometres of the 245 kV high voltage alternating current (HVAC) subsea export […]
Seaway Offshore Cables (SOC) has won a substantial contract for the supply and installation of the export and inter-array grid cable systems at the Yunlin offshore wind farm in Taiwan.
Moray Offshore Windfarm (East) Limited and NKT have signed a final binding agreement for the delivery and installation of export cable systems on the 950MW Moray East offshore wind farm.
Hellenic Cables has signed a contract with Vos Prodect Innovations for the design and delivery of sealed cable hang-off systems for the Modular Offshore Grid (MOG) in Belgium.
The global market for offshore wind array and export cables is forecast to be worth GBP 13.6 billion if all the projects in the international 10-year pipeline come to fruition, according to a report published by RenewableUK.
Nexans has been awarded a contract worth over EUR 35 million by Triton Knoll’s onshore cable installation lead contractor J Murphy & Sons Ltd to supply the land export cable and accessories in order to connect the Triton Knoll wind farm to the UK grid.
Ørsted has signed a six-year framework agreement with Trelleborg for the supply of the NjordGuard cable protection system for use on upcoming wind farm projects.
China's Hengtong has been awarded a contract by REN – Rede Electrica Nacional, S.A., the operator of transmission grids in Portugal, to design, manufacture and install the submarine export power cable system for the WindFloat Atlantic floating wind project.
Nexans has completed all export cable installation and burial works at the Beatrice site, where Siemens Transmission and Distribution team has started commissioning works on the recently installed second Offshore Transformer Module (OTM) in preparation for the energisation of the system.
UK marine engineering company MAATS Tech has announced that it received a patent for its latest product, the Vessel Enabler, a modular chute that enables high-tension horizontal cable lay in deep waters and thus eliminates the need for a vertical lay tower or vertical lay system.
Tideway BV, part of DEME Group, has laid the first offshore export cable section at Hornsea Project One, Ørsted’s 1.2GW wind farm offshore Yorkshire, UK.
Nexans has completed the manufacturing of the 220kV offshore export cable for the Beatrice wind farm, with the final section now en route to the offshore site in the Outer Moray Firth, Scotland.