A list of search results
Visser & Smit Hanab has completed the cable connection which will link the prototype Haliade-X 12 MW wind turbine at Maasvlakte 2 in the Port of Rotterdam to the Stedin high-voltage station. The 1.5-kilometre, 66kV connection was tested on 16 and 17 July, after which it was put into operation, Visser & Smit Hanab said. GE Renewable […]
GE Renewable Energy plans to recruit more than 200 employees at its LM Wind Power wind turbine blade manufacturing site in Cherbourg, France. 60 out of the additional employees were recently recruited and just began intensive training at the factory’s ‘Center of Excellence’. Opened in April 2018, the Cherbourg facility became the first wind turbine […]
GE Renewable Energy has installed three out of four tower sections which will support the prototype Haliade-X 12 MW wind turbine at Maasvlakte in the Port of Rotterdam, the Netherlands. The final tower section will be installed once the nacelle arrives at Maasvlakte during the summer, GE Renewable Energy said. The Haliade-X 12 MW nacelle […]
GE Renewable Energy has confirmed that the Haliade-X 12 MW nacelle and the 107-metre long blade will be shipped to ORE Catapult’s testing facilities in Blyth, UK as part of an advanced technology testing program. The program will focus on enhancing the Haliade-X platform before it enters into serial production in 2021. The Haliade-X nacelle, […]
LM Wind Power has rolled out the first blade for GE’s Haliade-X 12MW offshore wind turbine at its factory in Cherbourg, France. According to the company, the 107m long blade, the world's largest, has made its first trip outside the factory. Final preparations for the shipment of the LM 107.0 P blade to Maasvlakte-Rotterdam in the Netherlands are now […]
The four tower sections that will be part of GE’s Haliade-X 12 MW wind turbine prototype have arrived in Rotterdam. The four segments left GRI’s site in Seville, Spain, earlier this month. After unloading the tower segments, a series of pre-assembly works will take place, including the installation of some tower segments, GE Renewable Energy said. The […]
Spanish turbine tower manufacturer GRI has shipped out the four tower sections that will be part of GE’s Haliade-X 12 MW prototype to be installed later this summer in Maasvlakte-Rotterdam. The four segments at GRI’s site in Seville will be arriving in the Netherlands before the end of the month, GE Renewable Energy said. Upon arrival […]
Vattenfall and GE Renewable Energy plan to join forces in the deployment of GE’s new wind turbine, the Haliade-X 12 MW, in Europe. With a capacity of 12MW, the Haliade-X is the largest offshore wind turbine on the market to date. Development and production of the new 12MW turbine will mostly take place in France. […]
GE Renewable Energy is holding a series of supply chain engagement events in the UK for its Haliade-X 12MW offshore wind turbine. The events are part of GE's supply chain plan for the world's most powerful offshore wind turbine and will welcome potential suppliers that have suitable products or services that could support its production. GE […]
LM Wind Power has produced the first blade for GE’s Haliade-X 12MW offshore wind turbine at its factory in Cherbourg, France. According to LM Wind Power, the 107m long blade, the world's largest, has completed the molding process. The LM 107.0 P will now proceed with post-molding finishing touches, before undergoing testing and validation to demonstrate its ability […]
GE Renewable Energy and GMB Civiel BV have selected Royal HaskoningDHV to provide the foundation design for Haliade-X 12MW, the world's most powerful offshore wind turbine. The design is based on a piled foundation, with a large concrete block on top and a 28m diameter, said to meet the technical requirements without over-dimensioning. RHDHV said that […]
GE Renewable Energy is currently preparing the site in Maasvlakte, the Netherlands, for installation of its Haliade-X 12MW wind turbine prototype. Preparations of the site which will host the world's most powerful offshore wind turbine are being carried out in partnership with Future Wind. The two companies signed an agreement at the beginning of the year […]
Future Wind has organized a ground-breaking event in Maasvlakte, Rotterdam, to mark the start of preparatory activities to host GE’s Haliade-X 12 MW wind turbine prototype. Earlier this year, GE Renewable Energy and Future Wind, a joint venture between Pondera Development and SIF Holding Netherlands, signed an agreement to install the first Haliade-X 12 MW wind […]
GE's Haliade-X 12 MW offshore wind turbine is well suited and competitive for monopile solution over a wide range of site conditions, according to the specialist engineering firm Gavin and Doherty Geosolutions (GDG). GDG has been working with GE Renewable Energy to develop optimized XL Monopile soil-structure interaction models to support GE’s development of optimized foundation designs for […]
GE Renewable Energy and Future Wind, a joint venture of Pondera Development and Sif, have signed an agreement to install the first Haliade-X 12MW wind turbine prototype in the Port of Rotterdam this summer. The agreement, which will see the Haliade-X 12MW prototype installed onshore to facilitate access for testing, includes five years of testing and […]
GRI Renewable Industries has started manufacturing a tower for GE's Haliade-X 12 MW offshore wind turbine prototype in Sevilla, Spain. The work on the tower for the prototype started at the end of December, the company said. GE announced in March 2018 its plans to invest over USD 400 million over the next three to five […]
A full prototype Haliade-X 12 MW wind turbine will be installed at a yet-to-be-determined site in 2019, GE Renewable Energy said.
GE Renewable Energy has revealed additional details on the size and power of the Haliade-X 12 MW offshore wind turbine.
GE has installed all three HaliadeTM 150-6MW offshore wind turbines on the Xinghua Gulf demo project in China.
GE Renewable Energy GE will invest more than USD 400 million over the next three to five years to develop and deploy the largest, most powerful offshore wind turbine - the Haliade-X 12 MW.
The first out of three GE HaliadeTM 150-6MW offshore wind turbines has been installed in the Fujian Xinghua Gulf demo project, GE Renewable Energy reports.
GE Renewable Energy has published a photo showing its Haliade 150-6MW nacelles for the 396MW Merkur offshore wind farm being assembled at the company's Saint-Nazaire site in France.
Haliade nacelles and blades for the Fujian Xinghua Gulf demo project have reached China, GE Renewable Energy said.
GE Renewable Energy is currently loading the nacelles, generators and blades for the three Haliade 150-6MW offshore wind turbines to be installed at the Fujian Xinghua Gulf demo project in China.
GE Renewable Energy was selected by Chinese Fuqing Haixia Electricity Generation Company – a joint venture between China Three Gorges and Fujian Energy – to deliver three Haliade 150-6MW offshore wind turbines to the Fujian Xinghua Gulf demo project.
GE Renewable Energy has shared an image of two of the five Haliade 150 6MW nacelles ready to be loaded and start their journey across the Atlantic to the Port of Providence, Rhode Island, and become the heart of the first turbines ever to generate power offshore the USA at the 30MW Block Island wind […]